Turbocharger
- Turbo Stock Replacement HE351CW Dodge 5.9L 2004.5-2007
- 325HP HY35/HE351CW Turbo;
- Turbo Stock Replacement HE351CW Dodge 5.9L 2004.5-2007 Ram 2500/3500
P311-1C38C75 1045767 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2004 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2005 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2006 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2007 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2004 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2005 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2006 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2007 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
- Category: Stock Replacement
- Engine: 5.9l Cummins 04.5-07
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1045100
-
Features:
- Turbo wastegate is preset to OEM boost levels
- 68mm turbine wheel inducer
- Brand NEW replacement unit
- 60mm Compressor Wheel Inducer
- VSR high speed balanced
- No core charge
- BD Screamer Turbo HE351CW Dodge 5.9L Cummins 2003-2007
- BD Screamer Turbo HE351CW Dodge 5.9L Cummins 2003-2007 Ram 2500/3500
P311-0AD35A3 1045768 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2003 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2003 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2004 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2004 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2005 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2005 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2006 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2006 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2007 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2007 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
- Category: Single Turbo Performance
- Engine: 5.9l Cummins 04.5-07
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1057931
-
Features:
- High-flow 76mm large turbine wheel inducer increases turbine flow and efficiency.
- 63mm custom trim Billet Compressor Wheel
- Can support modifications up to 625hp
- More boost, lower drive pressure, and decreased peak EGT's
- Perfect for any truck with HP levels above stock (towing, street & race use)
- Turbo is preset to 30psi boost (BD Wastegate Canister)
- No Core Charge!
- BD Screamer 6.7L Cummins Turbo RAM 2019-2022 Pick-up HE300VG
- CARB EO D-553-14
- BD Screamer 6.7L Cummins Turbo RAM 2019-2022 2500/3500 Pick-up HE300VG
P311-111CA6E 1045772 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2019 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2019 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2020 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2021 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2019 Ram 4500 | L | 6 Cyl 6.7L | 408 | - |
| 2019 Ram 5500 | L | 6 Cyl 6.7L | 408 | - |
| 2020 Ram 5500 | L | 6 Cyl 6.7L | 408 | - |
| 2021 Ram 5500 | L | 6 Cyl 6.7L | 408 | - |
| 2022 Ram 4500 | L | 6 Cyl 6.7L | 408 | - |
| 2022 Ram 5500 | L | 6 Cyl 6.7L | 408 | - |
| 2023 Ram 4500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Stock Replacement
- Engine: 6.7l Cummins 19-up
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1057932
-
Features:
- 50-STATE LEGAL!
- Enables quicker turbo response
- Replaces OEM Parts: 5456364, 5456365, 68444771AA, 68444771AB, 5498271RX, 5554227
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST turbine Blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- Each actuator is calibrated and tested prior to shipping
- VSR high speed balanced
- CARB EO No. D-553-14
- Allows for higher turbine gas flow & increased efficiency
- Can support modifications up to 690 HP
- Drops into the stock location
- Includes BD's HE300 Turbo Mounting Kit (PN: 1045999) with all the necessary hardware for your turbo install
- BD Iron Horn 5.9L Cummins Turbo Kit S361SXE/76 0.91AR Dodge 2003-2007
- S361SXE/76 0.91 AR Turbo; Includes exhaust manifold;
- BD Iron Horn 5.9L Cummins Turbo Kit S361SXE/76 0.91AR Dodge 2003-2007 RAM 2500/3500
P311-2264247 1045170 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2003 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2003 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2004 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2004 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2005 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2005 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2006 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2006 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
| 2007 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
| 2007 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
- Category: Single Turbo Performance
- Engine: 5.9l Cummins 04.5-07
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1045982
- Wheel Size: S361sxe/76 0.91 Ar
-
Features:
- Increase airflow for more power, response, and reliability
- Replace your factory turbo with a S300 SX-E Borg Warner T4 flange turbo
- Approximate rated 500hp (depending on truck configuration)
- Kit includes a 5.9L 2-piece BD high flow pulse T4 manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Comp Wheel: 61.44mm 2.42in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.91
- Flow: 77 Lb./min
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge 2007.5-2018
- S363SXE/76 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge/RAM 2007.5-2018 2500/3500
P311-54C87DA 1045292 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2007 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2008 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2007 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2008 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2012 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2014 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2016 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2017 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2018 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2015 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2018 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1045982
- Wheel Size: S363sxe/76 0.91 Ar
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/80 0.91AR Dodge 2007.5-2018
- S363SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
P311-3E1BCE3 1045293 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2007 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2008 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2009 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2011 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2013 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2016 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2017 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2011 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2012 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2014 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2016 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1064264
- Wheel Size: S363sxe/80 0.91 Ar
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 0.91AR Dodge 2007.5-2018
- S364SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
P311-0D226F0 1045294 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2008 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2009 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2010 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2007 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2009 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2010 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2011 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2017 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2011 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2014 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2016 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1045982
- Wheel Size: S364sxe/80 0.91 Ar
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 64.5mm 2.54in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 82 Lb./min
- Approximate rated 600hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge 2007.5-2018
- S364SXE/80 1.00AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge/RAM 2007.5-2018 2500/3500
P311-15CC36D 1045295 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2007 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2008 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2014 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2017 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2011 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2012 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2013 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2014 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2015 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2016 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2017 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1064264
- Wheel Size: S364sxe/80 1.00 Ar
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 64.5mm 2.54in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 1.00
- Flow: 82 Lb./min
- Approximate rated 600hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge 2007.5-2018
- S366SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
P311-59FA87D 1045296 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2008 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2007 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2010 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2011 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2012 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2017 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2012 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2013 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2014 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2017 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2018 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1045982
- Wheel Size: S366sxe/80 0.91 Ar
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 66mm 2.60in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 87 Lb./min
- Approximate rated 650hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- BD Iron Horn 6.7L Cummins Turbo Kit S369SXE/80 1.00AR Dodge 2007.5-2018
- S369SXE/80 1.00AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S369SXE/80 1.00AR Dodge/RAM 2007.5-2018 2500/3500
P311-48017D3 1045299 BD Diesel New
| Vehicle | Block | Engine | CID | CC |
|---|---|---|---|---|
| 2007 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2008 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2010 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2007 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2009 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2010 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2011 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2012 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2018 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
| 2014 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
| 2015 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1064264
- Wheel Size: S369sxe/80 1.00 Ar
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 69.00mm 2.72in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 1.00
- Flow: 98 Lb./min
- Approximate rated 700hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation