Drive Axle Shaft - Rough Country, Yukon Gear - Rear, Front Inner, Front, Outer, Left, Rear Left

Axle Shaft - Drive Axle Shaft - Rear Yukon Gear

Yukon full float rear axle for 2011+GM 11.5in.; 37.25in. long; (8x3.818in.)
11.5 in. ; Front ; 37.25 in. Long GM 11.5 in.~37.25 in. long; 8 x 3.818 in. bolt pattern
Yukon rear axle for 2011 and newer GM 11.5in. with a length of 37.25in. and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost.

Position: Rear

Our Price: $ 277.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-01D4496 Manufacturer # YA G20920665 Brand Yukon Gear Condition: New

Notes: 11.5 in. ; Front ; 37.25 in. Long GM 11.5 in.~37.25 in. long; 8 x 3.818 in. bolt pattern

Vehicle	Drive Type	Position
2015 GMC Sierra 3500 HD		Front Outer
2014 Chevrolet Silverado 2500 HD	4WD	Front Outer
2014 GMC Sierra 3500 HD		Front Outer
2015 Chevrolet Silverado 3500 HD		Front Outer
2015 GMC Sierra 2500 HD		Front Outer

Notes: 11.5 in. ; Front ; 37.25 in. Long GM 11.5 in.~37.25 in. long; 8 x 3.818 in. bolt pattern

Vehicle	Drive Type	Position
2011 Chevrolet Silverado 2500 HD	4WD	Rear
2011 Chevrolet Silverado 3500 HD		Rear
2011 GMC Sierra 2500 HD		Rear
2014 Chevrolet Silverado 3500 HD		Rear
2014 GMC Sierra 2500 HD		Rear
2014 GMC Sierra 3500 HD		Rear

Product Attributes:

Axle Type: Chrysler 11.5 In.
WARNING CA Proposition 65: No

Features:
- Yukon Products Are Held To The Highest Quality Standards
- Engineered Using State-Of-The-Art Design Software
- Restore Performance
- Drive w/Confidence

About Yukon Gear

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for pas ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft Assembly - Drive Axle Shaft - Front Inner Yukon Gear

Yukon Rear Axle Assembly for 2004-2007 Nissan M226 34.03in. long 32-Spline
Nissan M226 Rear; 34.03 in. Left Hand Or 32 Spline; Fits Standard Open Only Nissan M226 / Dana 44; Rear Axle Shaft; 34.03 in. Long; 32 Spline; Fits Standard Open Differential; w/o Factory Locker~Nissan M226; 34.03 in. Left Hand Or 32 Spline; Fits Standard Open Only
M226 04-07 NISSAN TITAN REAR AXLE ASSEMBLY ; 34.03in. Left hand or Right hand ; 32 Spline ; FITS Standard Open ONLY .

Position: Front Inner

Our Price: $ 340.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-1D92E13 Manufacturer # YA D84776-1 Brand Yukon Gear Condition: New

Notes: Nissan M226 Rear; 34.03 in. Left Hand Or 32 Spline; Fits Standard Open Only Nissan M226 / Dana 44; Rear Axle Shaft; 34.03 in. Long; 32 Spline; Fits Standard Open Differential; w/o Factory Locker~Nissan M226; 34.03 in. Left Hand Or 32 Spline; Fits Standard Open Only

Vehicle	Position
2004 Nissan Pathfinder	Right
2005 Nissan Pathfinder	Right
2006 Nissan TITAN	Right
2007 Nissan Pathfinder	Right
2007 Nissan TITAN	Right
2004 Nissan TITAN	Right
2005 Nissan TITAN	Right
2006 Nissan Pathfinder	Right

Notes: Nissan M226 Rear; 34.03 in. Left Hand Or 32 Spline; Fits Standard Open Only Nissan M226 / Dana 44; Rear Axle Shaft; 34.03 in. Long; 32 Spline; Fits Standard Open Differential; w/o Factory Locker~Nissan M226; 34.03 in. Left Hand Or 32 Spline; Fits Standard Open Only

Vehicle	Position
2004 Nissan Pathfinder	Front Inner
2005 Nissan Pathfinder	Front Inner
2006 Nissan TITAN	Front Inner

Product Attributes:

Axle Type: Chrysler 11.5 In.
WARNING CA Proposition 65: No

Features:
- Fits Standard Open Differential Only
- Left Hand Or Right Hand
- Rear
- 32 Spline
- 2004-2007 Nissan Titan M226

About Yukon Gear

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for pas ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Front Yukon Gear

Yukon Chromoly Inner Front Axle for Dana 30; 30 Spline; RH; 34.5in. Long; w/Lock
34.5 in.; 30 Spline Right Dana 30; Aftermarket 30 spline upgrade; Uses 1350 Serier Joint; 4340 Chromoly; 07-11 applications require larger 1350 stub axles
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.

Position: Front

Our Price: $ 289.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-012B932 Manufacturer # YA W38837 Brand Yukon Gear Condition: New

Vehicle	Submodel	Position
2007 Jeep Wrangler	X	Front
2007 Jeep Wrangler	Unlimited Sahara	Front
2008 Jeep Wrangler	Unlimited X	Front
2009 Jeep Wrangler	Sahara	Front
2009 Jeep Wrangler	Unlimited Sahara	Front
2010 Jeep Wrangler	X	Front
2010 Jeep Wrangler	Sahara	Front
2010 Jeep Wrangler	Unlimited Sahara	Front
2011 Jeep Wrangler	Sahara	Front
2011 Jeep Wrangler	Unlimited Sahara	Front
2011 Jeep Wrangler	70th Anniversary	Front

Product Attributes:

Axle Type: Chrysler 11.5 In.
WARNING CA Proposition 65: No

Features:
- Fits Dana 30 Differential w/Aftermarket Locker
- Front Inner Axle
- Right-Hand Side
- Measures 34.5 in. Long
- 30 Spline
- Uses 7166 Series U-Joint
- Heavy Duty 4340 Chromoly Construction

About Yukon Gear

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior produc ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Front Yukon Gear

Yukon Chromoly Outer Front Axle for Dana 30/Dana 44 Diff; 32 Spline; 6.3in. Long
Dana 44 Reverse; Replacement; Stud Dana 44; Reverse Rotation; 4340 Chromoly Replacement; Outer Stub Axle; 32 Spline; Fits 1350 U-Joint~Dana 44; Reverse Rotation; Replacement; Stud
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car; truck and SUV applications. High quality alloys and the best in heat-treating technologies provide a strong axle for all uses

Position: Front

Our Price: $ 241.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-0EFF567 Manufacturer # YA W39127 Brand Yukon Gear Condition: New

Vehicle	Submodel	Drive Type	Position
2007 Jeep Wrangler	X		Front
2007 Jeep Wrangler	Sahara		Front
2007 Jeep Wrangler	Rubicon		Front
2007 Jeep Wrangler	Unlimited X	4WD	Front
2008 Jeep Wrangler	Unlimited Rubicon		Front
2008 Jeep Wrangler	Unlimited Sahara	4WD	Front
2009 Jeep Wrangler	Sahara		Front
2009 Jeep Wrangler	Unlimited Sahara	4WD	Front
2010 Jeep Wrangler	X		Front
2010 Jeep Wrangler	Sahara		Front
2010 Jeep Wrangler	Rubicon		Front

Product Attributes:

Axle Type: Dana 44
WARNING CA Proposition 65: No

Features:
- Fits Dana 30 Dana 44 Differentials
- Front Outer Axle
- Measures 6.3 in. Long
- 32 Spline
- Uses 1350/5-716X Series U-Joint
- Heavy Duty 4340 Chromoly Construction

About Yukon Gear

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior produc ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Rear Yukon Gear

Yukon Chromoly Rear Axle; Dana 44; JK Rubicon; 30 Spline; 32in. Long; Cut to Fit
Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly Dana 44; Non-Rubicon JK; 30 Spline; Replacement; 4340 Chrome-Moly
Yukon high-performance axles are built with high-strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature induction coil heat treating to create an axle of unmatched quality and durability.

Position: Rear

Our Price: $ 332.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-4E62D16 Manufacturer # YA WD44-30-32.0 Brand Yukon Gear Condition: New

Vehicle	Submodel	Position
2007 Jeep Wrangler	Sahara	Rear
2007 Jeep Wrangler	Unlimited Sahara	Rear
2008 Jeep Wrangler	X	Rear
2008 Jeep Wrangler	Rubicon	Rear
2008 Jeep Wrangler	Unlimited Rubicon	Rear
2008 Jeep Wrangler	Unlimited X	Rear
2009 Jeep Wrangler	Unlimited Rubicon	Rear
2009 Jeep Wrangler	Unlimited X	Rear
2010 Jeep Wrangler	Sahara	Rear
2010 Jeep Wrangler	Unlimited Sahara	Rear
2010 Jeep Wrangler	Unlimited X	Rear

Product Attributes:

Axle Type: Dana 44
WARNING CA Proposition 65: No

Features:
- Fits Dana 44 Differential
- Fits Jeep Wrangler
- Cherokee And JK Non-Rubicon Rear w/Dana Spicer 44 Differential
- Triple Drilled: 5 X 4.5 in.
- 5 X 5 in. And 5 X 5.5 in. Bolt Patterns
- 30 Spline
- Cut To Length Design Fits 26 in. 32 in. Applications
- 4340 Chromoly Construction

About Yukon Gear

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior produc ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Outer Yukon Gear

Yukon Chromoly Rear Axle Kit for Dana 35; Jeep JL; 29 Spline; 32.3in. Long
Dana 35; 29 Spline; 32.2 in. Length Dana 35 (200mm) JL Rear; 4340 Chrome-Moly; 29 Spline; 32.3 in. Long
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.

Position: Outer

Our Price: $ 433.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-03E9319 Manufacturer # YA WD35JL-K Brand Yukon Gear Condition: New

Notes: Dana 35; 29 Spline; 32.2 in. Length Dana 35 (200mm) JL Rear; 4340 Chrome-Moly; 29 Spline; 32.3 in. Long

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Front Inner
2019 Jeep Wrangler	Unlimited Sahara	Front Inner
2019 Jeep Wrangler	Sport S	Front Inner
2018 Jeep Wrangler	Unlimited Sahara	Front Inner
2018 Jeep Wrangler	Unlimited Sport	Front Inner
2018 Jeep Wrangler	Sport S	Front Inner
2018 Jeep Wrangler	Unlimited Sport S	Front Inner
2019 Jeep Wrangler	Sport	Front Inner
2019 Jeep Wrangler	Unlimited Sport	Front Inner
2019 Jeep Wrangler	Unlimited Sport S	Front Inner

Notes: Dana 35; 29 Spline; 32.2 in. Length Dana 35 (200mm) JL Rear; 4340 Chrome-Moly; 29 Spline; 32.3 in. Long

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Outer

Product Attributes:

Axle Type: Chrysler 11.5 In.
WARNING CA Proposition 65: No

Features:
- Fits Dana 35 Differential
- For Left Or Right Side
- Measures 32.3 in. Long
- 29 Spline
- Double Drilled For 5 X 5 in. And 5 X 5.5 in. Bolt Pattern
- Heavy Duty 4340 Chromoly Construction
- Includes Axle Shaft
- Axle Bearing And Race
- Seal
- And Studs

About Yukon Gear

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior produc ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Rear Yukon Gear

Yukon Rear Chromoly Axle for Jeep JL Non-Rubicon Dana 44; 32 Spline; 32.3in. Lon
Dana 44; 33 Spline; 32.3 in. Length; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 32 Spline; 32.3 in. Long Axle Kit (1 side)
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.

Position: Rear

Our Price: $ 393.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-012FA71 Manufacturer # YA WD44JLNON-K Brand Yukon Gear Condition: New

Notes: Dana 44; 33 Spline; 32.3 in. Length; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Rear

Notes: Dana 44; 33 Spline; 32.3 in. Length; Rear; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Right

Notes: Dana 44; 33 Spline; 32.3 in. Length; Rear; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Front

Notes: Dana 44; 33 Spline; 32.3 in. Length; Rear; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Front Inner

Notes: Dana 44; 33 Spline; 32.3 in. Length; Rear; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Inner

Notes: Dana 44; 33 Spline; 32.3 in. Length; Rear; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Front Right Inner

Notes: Dana 44; 33 Spline; 32.3 in. Length; Rear; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Front Right

Notes: Dana 44; 33 Spline; 32.3 in. Length; Rear; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Sport	Rear Left

Notes: Dana 44; 33 Spline; 32.3 in. Length; Includes SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 32 Spline; 32.3 in. Long Axle Kit (1 side)

Vehicle	Submodel	Position
2018 Jeep Wrangler	Unlimited Sahara	Rear
2018 Jeep Wrangler	Unlimited Sport	Rear
2018 Jeep Wrangler	Sport S	Rear

Product Attributes:

Axle Type: Chrysler 11.5 In.
WARNING CA Proposition 65: No

Features:
- Fits Dana 44 Differential
- Rear Axle For Both Sides
- 32.3 in. Long
- 32 Spline
- Includes Set Of 10 Bearings
- 4340 Chromoly Construction

About Yukon Gear

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior produc ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Rear Yukon Gear

Yukon Chromoly Rear Axle; Dana 44; Jeep JL/JT Rubicon; RH; 32 Spline; 33.9in. Lo
Dana 44; 32 Spline; 33.9 in. Length Dana 44 (220mm) JL Rubicon; Right Hand Axle; 4340 Chromoly; 32 Spline; 33.9 in. Long;
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.

Position: Rear

Our Price: $ 303.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-16B328B Manufacturer # YA WD44JL-32-33.9 Brand Yukon Gear Condition: New

Notes: Dana 44; 32 Spline; 33.9 in. Length Dana 44 (220mm) JL Rubicon; Right Hand Axle; 4340 Chromoly; 32 Spline; 33.9 in. Long;

Vehicle	Submodel	Position
2018 Jeep Wrangler	Rubicon	Front
2018 Jeep Wrangler	Unlimited Rubicon	Front
2019 Jeep Wrangler	Rubicon	Front
2019 Jeep Wrangler	Unlimited Rubicon	Front

Notes: Dana 44; 32 Spline; 33.9 in. Length Dana 44 (220mm) JL Rubicon; Right Hand Axle; 4340 Chromoly; 32 Spline; 33.9 in. Long;

Vehicle	Submodel	Position
2018 Jeep Wrangler	Rubicon	Front Outer
2019 Jeep Wrangler	Unlimited Rubicon	Front Outer
2018 Jeep Wrangler	Unlimited Rubicon	Front Outer
2019 Jeep Wrangler	Rubicon	Front Outer

Notes: Dana 44; 32 Spline; 33.9 in. Length Dana 44 (220mm) JL Rubicon; Right Hand Axle; 4340 Chromoly; 32 Spline; 33.9 in. Long;

Vehicle	Submodel	Position
2018 Jeep Wrangler	Rubicon	Rear
2018 Jeep Wrangler	Unlimited Rubicon	Rear
2019 Jeep Wrangler	Rubicon	Rear

Product Attributes:

Axle Type: Chrysler 11.5 In.
WARNING CA Proposition 65: No

Features:
- Fits Dana 44 M220 Differential
- For Right-Hand Side
- Measures 33.9 in.
- 32 Spline
- Double Drilled Flange
- Heavy Duty 4340 Chromoly Construction

About Yukon Gear

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior produc ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Left Yukon Gear

Yukon 1541H alloy axle for Dana 44 JK Non-Rubicon rear. 30 Spline; 32in. long.
Dana 44; 30 Spline; 32 in. Long; Includes Bearing; Seal; ABS Ring Dana 44; Non-Rubicon JK; 30 Spline; 32 in. Long; Includes Bearing; Seal; ABS Ring~Dana 44 Rear. JK Non-Rubicon; Axle Shaft; 30 Spline; 32 in. Long; Includes Bearing; Seal; ABS Ring
Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects. This axle includes bearing; seal; retainer/ABS ring.

Position: Left

Our Price: $ 340.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-1A0AC77 Manufacturer # YA D44JKNON Brand Yukon Gear Condition: New

Vehicle	Submodel	Drive Type	Position
2007 Jeep Wrangler	X		Left
2007 Jeep Wrangler	Rubicon		Left
2007 Jeep Wrangler	Unlimited Sahara	RWD	Left
2007 Jeep Wrangler	Unlimited X	4WD	Left
2008 Jeep Wrangler	X		Left
2008 Jeep Wrangler	Rubicon		Left
2008 Jeep Wrangler	Unlimited Rubicon		Left
2008 Jeep Wrangler	Unlimited Sahara	4WD	Left
2008 Jeep Wrangler	Unlimited X	RWD	Left
2008 Jeep Wrangler	Unlimited X	4WD	Left
2009 Jeep Wrangler	X		Left

Product Attributes:

Axle Type: Dana 44
WARNING CA Proposition 65: No

Features:
- Fits Jeep JK Non-Rubicon
- 5 X 5 in. Bolt Pattern
- 32 In. Long
- 30 Spline
- 5 X 5.5 in. Bolt Pattern
- Includes Axle Shaft
- Wheel Bearing And Seal
- Axle Retainer And ABS Tone Ring

About Yukon Gear

Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for pas ... Read More About This Yukon Gear Drive Axle Shaft

Axle Shaft - Drive Axle Shaft - Rear Left Yukon Gear

Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Rubicon; LH; 32 Spline; 31.25in.
Dana 44 Rear; 31 1/4 in. Long Dana 44; JK Rubicon; 31 1/4 in. Long~Dana 44. JK Rubicon; Left Rear Axle Kit; 4340 Chromoly; 31 1/4 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.

Position: Rear Left

Our Price: $ 418.89

Product can be shipped direct or picked up at the following store locations:

11 Garden Ave, Stoney Creek, ON
47438 Homestead Rd, Steeves Mountain, NB

ETA depends on stock at time of order.

Qty:

Part # P311-5429801 Manufacturer # YA WD44JKRUB-L-K Brand Yukon Gear Condition: New

Vehicle	Submodel	Position
2007 Jeep Wrangler	Rubicon	Rear Left
2007 Jeep Wrangler	Unlimited Rubicon	Rear Left
2008 Jeep Wrangler	Unlimited Rubicon	Rear Left
2008 Jeep Wrangler	Rubicon	Rear Left
2009 Jeep Wrangler	Unlimited Rubicon	Rear Left
2009 Jeep Wrangler	Rubicon	Rear Left
2010 Jeep Wrangler	Unlimited Rubicon	Rear Left
2010 Jeep Wrangler	Rubicon	Rear Left
2011 Jeep Wrangler	Unlimited Rubicon	Rear Left
2011 Jeep Wrangler	Rubicon	Rear Left
2012 Jeep Wrangler	Rubicon	Rear Left

Product Attributes:

Axle Type: Dana 44
WARNING CA Proposition 65: No

Features:
- Fits Dana 44 Differential
- For Left-Hand Side
- Measures 32.6 in
- 32 Spline
- 5 X 5.0 in. Bolt Pattern
- Heavy Duty 4340 Chromoly Construction
- Includes Axle Shaft
- Axle Bearing And Seal
- ABS Ring
- Retainer
- And Studs

About Yukon Gear

Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior produc ... Read More About This Yukon Gear Drive Axle Shaft