Coilover Spring and Shock Assembly
- 0" - 3" Lift Except 5 Lug Models Requires Aftermarket front Upper Control Arms
- 1996-2004 TACOMA/1996-2002 4RUNNER EXT TRAVEL 2.5 VS IR COILOVER KIT
P311-395A5CA 58615 ICON Vehicle Dynamics New
| Vehicle | Position | Drive Type | Submodel |
|---|---|---|---|
| 1997 Toyota 4Runner | Front | ||
| 1998 Toyota 4Runner | Front | ||
| 2000 Toyota 4Runner | Front | ||
| 2001 Toyota 4Runner | Front |
| Vehicle | Position | Drive Type | Submodel |
|---|---|---|---|
| 2001 Toyota 4Runner | Front | ||
| 1996 Toyota Tacoma | Front | 4WD | |
| 1997 Toyota Tacoma | Front | 4WD |
| Vehicle | Position | Drive Type | Submodel |
|---|---|---|---|
| 1999 Toyota Tacoma | RWD | Pre Runner | |
| 2002 Toyota Tacoma | RWD | Pre Runner | |
| 2004 Toyota Tacoma | RWD | Pre Runner |
| Vehicle | Position | Drive Type | Submodel |
|---|---|---|---|
| 1997 Toyota Tacoma | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Body Diameter: 2.5
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
-
Features:
- Adjustable ride height from 0" - 3
- Race shock piston with flutter stack compression valving
- Cad-plated threaded body
- Billet aluminum upper mount
- 5/8" PTFE-lined spherical bearings
- Completely re-buildable
- 2.5" shock diameter to prevent overheating
- Chrome-silicon spring
- 250 PSI nitrogen-charged internal reservoir
- 00-06 TUNDRA/01-07 SEQUOIA EXT TRAVEL 2.5 VS IR COILOVER KIT 700LB
- 0" - 3" Lift with Added Front End Weight Over Stock Requires Aftermarket front Upper Control Arms
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
P311-34689BC 58625-700 ICON Vehicle Dynamics New
| Vehicle | Position |
|---|---|
| 2001 Toyota Tundra | Front |
| 2005 Toyota Tundra | Front |
| 2006 Toyota Tundra | Front |
| Vehicle | Position |
|---|---|
| 2001 Toyota Tundra | Front |
| 2002 Toyota Tundra | Front |
| 2004 Toyota Tundra | Front |
| 2006 Toyota Sequoia | Front |
| Vehicle | Position |
|---|---|
| 2000 Toyota Tundra | Front |
| 2001 Toyota Tundra | Front |
| 2004 Toyota Tundra | Front |
| 2006 Toyota Tundra | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2.5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Dust Shield Included: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material:
- Aluminum
- Steel
- Maximum Lift: 2.5
- Minimum Lift: 0
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 700
- Spring Rate Type: Linear
- Upper Mount Type: Mounting Plate
-
Features:
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with aftermarket front upper control arms yields maximum wheel travel
- Height-adjustable coilovers offer 0-2.5" of lift height adjustment over stock
- 2.5" diameter shock bodies with internal reservoirs for consistent performance
- ICON engineered coil springs with 700 lbs/in spring rate are more ideal for heavier equipped front ends
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- 05-23 TACOMA 2.5 VS IR COILOVER KIT-700
- Up to 33 x 11.50 (in) Tire with Minor Fender Trimming with Additional Weight Added to Front End Raises Front 0 (in) - 2.75 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride characteristics across varying types of terrain.
P311-3FD14A3 58630-700 ICON Vehicle Dynamics New
| Vehicle | Position | Submodel | Drive Type |
|---|---|---|---|
| 2012 Toyota Hilux | Front | ||
| 2013 Toyota Hilux | Front |
| Vehicle | Position | Submodel | Drive Type |
|---|---|---|---|
| 2007 Toyota Tacoma | Front | Pre Runner | |
| 2009 Toyota Tacoma | Front | SR5 Prerunner | |
| 2010 Toyota Tacoma | Front | Pre Runner | |
| 2010 Toyota Tacoma | Front | TRD Sport | |
| 2011 Toyota Tacoma | Front | Pre Runner | |
| 2013 Toyota Tacoma | Front | Base | 4WD |
| 2014 Toyota Tacoma | Front | TRD Sport | |
| 2015 Toyota Tacoma | Front | Base | 4WD |
| Vehicle | Position | Submodel | Drive Type |
|---|---|---|---|
| 2019 Toyota Tacoma | Front | Sport |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2.5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material:
- Aluminum
- Steel
- Maximum Lift: 3.5
- Minimum Lift: 0
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 700
- Spring Rate Type: Linear
- Upper Mount Type: Mounting Plate
-
Features:
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Height-adjustable coilovers offer 0-3.5" or 0-2.75" of lift height adjustment depending on year model
- ICON engineered coil springs with 700 lbs/in spring rate are more ideal for heavier equipped front ends
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- 05-23 TACOMA EXT TRAVEL 2.5 VS IR COILOVER KIT 700LB
- Up to 33 x 11.50 (in) Tire with Minor Fender Trimming with Additional Weight Added to Front End Requires Aftermarket Front Upper Control Arms Raises Front 0 (in) - 2.75 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- These extended length ICON VS 2.5 Series coilovers offer increased wheel travel but also require the installation of aftermarket upper control arms. They are vehicle specific, 100% rebuildable, and 100% revalveable.
P311-59E5101 58635-700 ICON Vehicle Dynamics New
| Vehicle | Submodel | Drive Type | Position |
|---|---|---|---|
| 2008 Toyota Tacoma | Base | 4WD | Front |
| 2010 Toyota Tacoma | Base | 4WD | Front |
| 2010 Toyota Tacoma | TRD Sport | Front | |
| 2012 Toyota Tacoma | Base | 4WD | Front |
| 2012 Toyota Tacoma | Pre Runner | Front | |
| 2013 Toyota Tacoma | Pre Runner | Front | |
| 2014 Toyota Tacoma | Base | 4WD | Front |
| 2014 Toyota Tacoma | Pre Runner | Front |
| Vehicle | Submodel | Drive Type | Position |
|---|---|---|---|
| 2017 Toyota Tacoma | Limited | Front | |
| 2017 Toyota Tacoma | TRD Sport | Front | |
| 2018 Toyota Tacoma | Limited | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2.5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Dust Shield Included: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material: Aluminum
- Maximum Lift: 3.5
- Minimum Lift: 0
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 700
- Spring Rate Type: Linear
- Upper Mount Type: Mounting Plate
-
Features:
- Height-adjustable coilovers offer 0-3.5" or 0-2.75" of lift height adjustment depending on year model
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended Travel length requires installation of aftermarket front upper control arms
- ICON engineered coil springs with 700 lbs/in spring rate are more ideal for heavier equipped front ends
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- FK Rod End bearings provide extended longevity and minimal deflection
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- 0" - 3.5" Lift
- 2007-2009 FJ CRUISER/2003-2009 4RUNNER/2003-2009 GX470 2.5 VS INTERNAL RESERVOIR COILOVER KIT
P311-0F79A63 58640 ICON Vehicle Dynamics New
| Vehicle | Position |
|---|---|
| 2003 Lexus GX470 | Front |
| 2005 Lexus GX470 | Front |
| 2005 Toyota 4Runner | Front |
| 2009 Toyota 4Runner | Front |
| Vehicle | Position |
|---|---|
| 2003 Lexus GX470 | Front |
| 2004 Lexus GX470 | Front |
| 2005 Lexus GX470 | Front |
| 2008 Lexus GX470 | Front |
| 2009 Lexus GX470 | Front |
| 2004 Toyota 4Runner | Front |
| 2005 Toyota 4Runner | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2.5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material: Aluminum
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
-
Features:
- Adjustable coilovers yield 0-3.5" of front lift height
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- FK Rod End bearings provide extended longevity and minimal deflection
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- 07-21 TUNDRA 2.5 VS IR COILOVER KIT W PROCOMP 6
- Requires ProComp 6" Lift Kit
- 2007-2021 TUNDRA 2.5 VS INTERNAL RESERVOIR COILOVER KIT W/ PROCOMP 6" LIFT
P311-1CCBDE5 58651-CB ICON Vehicle Dynamics New
| Vehicle | Position |
|---|---|
| 2008 Toyota Tundra | Front |
| 2011 Toyota Tundra | Front |
| 2012 Toyota Tundra | Front |
| 2013 Toyota Tundra | Front |
| 2016 Toyota Tundra | Front |
| 2017 Toyota Tundra | Front |
| 2018 Toyota Tundra | Front |
| 2019 Toyota Tundra | Front |
| Vehicle | Position |
|---|---|
| 2009 Toyota Tundra | Front |
| 2015 Toyota Tundra | Front |
| 2018 Toyota Tundra | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2.5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material:
- Aluminum
- Steel
- Remote Reservoir: No
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257340 - 7/8 Shaft 14.25 Oal, 10.00 Travel
- 611025 - 07 Tundra Co Hardware Kit Pair
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Upper Mount Type: Mounting Plate
- 0 (in) - 3 (in) Lift
- 1996-2004 TACOMA 2.5 VS STANDARD TRAVEL REMOTE RESERVOIR COILOVER KIT
P311-3A2D833 58710 ICON Vehicle Dynamics New
| Vehicle | Position | Drive Type | Submodel |
|---|---|---|---|
| 1995 Toyota Tacoma | Front | ||
| 1996 Toyota Tacoma | Front | ||
| 1998 Toyota Tacoma | Front | ||
| 2002 Toyota Tacoma | Front | ||
| 2003 Toyota Tacoma | Front |
| Vehicle | Position | Drive Type | Submodel |
|---|---|---|---|
| 1997 Toyota Tacoma | Front | 4WD | |
| 1999 Toyota Tacoma | Front | 4WD | |
| 2000 Toyota Tacoma | Front | 4WD | |
| 2003 Toyota Tacoma | Front | 4WD |
| Vehicle | Position | Drive Type | Submodel |
|---|---|---|---|
| 1998 Toyota Tacoma | RWD | Pre Runner | |
| 2000 Toyota Tacoma | RWD | Pre Runner |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable: No
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2,5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: Yes
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 650
- Upper Mount Type: Mount Plate
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock on and off-road
- Height-adjustable coilovers offer 0-3" of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- 0" - 3" Lift Except 5 Lug Models Requires Aftermarket Upper Control Arms
- 1996-2004 TACOMA 2.5 VS EXTENDED TRAVEL REMOTE RESERVOIR COILOVER KIT
P311-00F8651 58715 ICON Vehicle Dynamics New
| Vehicle | Submodel | Drive Type | Position |
|---|---|---|---|
| 1995 Toyota Tacoma | 4WD | Front | |
| 1997 Toyota Tacoma | 4WD | Front | |
| 1999 Toyota Tacoma | Pre Runner | RWD | Front |
| 1999 Toyota Tacoma | 4WD | Front | |
| 2000 Toyota Tacoma | Pre Runner | RWD | Front |
| 2000 Toyota Tacoma | 4WD | Front | |
| 2003 Toyota Tacoma | 4WD | Front |
| Vehicle | Submodel | Drive Type | Position |
|---|---|---|---|
| 1996 Toyota Tacoma | Front | ||
| 1997 Toyota Tacoma | Front | ||
| 2000 Toyota Tacoma | Front | ||
| 2003 Toyota Tacoma | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2,5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: Yes
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
-
Features:
- Increased wheel travel over stock
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock on and off-road
- Height-adjustable coilovers offer 0-3" of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- 0" - 3" Lift Requires Aftermarket front Upper Control Arms
- 1996-2002 4RUNNER 2.5 VS EXTENDED TRAVEL REMOTE RESERVOIR COILOVER KIT
P311-2A21BF3 58716 ICON Vehicle Dynamics New
| Vehicle | Position |
|---|---|
| 1996 Toyota 4Runner | Front |
| 1998 Toyota 4Runner | Front |
| 1999 Toyota 4Runner | Front |
| 2000 Toyota 4Runner | Front |
| 2001 Toyota 4Runner | Front |
| 2002 Toyota 4Runner | Front |
| Vehicle | Position |
|---|---|
| 1996 Toyota 4Runner | Front |
| 1997 Toyota 4Runner | Front |
| 2000 Toyota 4Runner | Front |
| 2001 Toyota 4Runner | Front |
| 2002 Toyota 4Runner | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: No
- Adjustable Height: Yes
- Body Diameter: 2.5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: Recommended Aftermarket Tires: 33" X 11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: Yes
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
-
Features:
- Increased wheel travel over ICON standard travel coilovers
- Vehicle specific tuned front shocks for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended off-road use
- Improved ride quality over stock both on and off-road
- Height-adjustable coilovers offer 0-3" of lift height adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no cutting or welding necessary for installation
- 0" - 3" Lift Requires Aftermarket front Upper Control Arms
- 1996-2002 4RUNNER 2.5 VS EXTENDED TRAVEL REMOTE RESERVOIR CDCV COILOVER KIT
P311-4F29F53 58716C ICON Vehicle Dynamics New
| Vehicle | Position |
|---|---|
| 1996 Toyota 4Runner | Front |
| 1998 Toyota 4Runner | Front |
| 1999 Toyota 4Runner | Front |
| 2000 Toyota 4Runner | Front |
| 2001 Toyota 4Runner | Front |
| 2002 Toyota 4Runner | Front |
| Vehicle | Position |
|---|---|
| 1997 Toyota 4Runner | Front |
| 1998 Toyota 4Runner | Front |
| 1999 Toyota 4Runner | Front |
| 2000 Toyota 4Runner | Front |
| 2002 Toyota 4Runner | Front |
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Adjustable Damping: Yes
- Adjustable Height: Yes
- Body Diameter: 2.5
- Boot Included: No
- California Prop 65 Warning: Yes
- Coil Over Springs Included: Yes
- Damping Type: Oil
- Dust Shield: No
- Gas Charged: Yes
- Grade Type: Performance
- Lower Mount Type: Eyelet
- Material:
- Aluminum
- Steel
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33" X 11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Remote Reservoir: Yes
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
- 611019 - Coilover Hardware Kit Pair
- 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Spring Material: Steel
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
-
Features:
- Increased wheel travel and ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- External reservoir to attain cooler operating temperatures during extended offroad use
- ICON CDCV equipped for external tunability of your shocks
- Height-adjustable coilovers offer 0-3" of lift height
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock body with 7/8" induction hardened, chrome plated shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 100% Bolt-on - no drilling or welding necessary for installation