Air Suspension Compressor Mount
- Glide Guard On-Board Air Compressor Mount
- On Board Mount; Hi Tuck Design; Matte Black Finish
- Glide Guard On-Board Air Compressor Mount Jeep Wrangler (JK) 07-18 V6-3.6L/3.8L
P311-419346D 46-79001 AFE Filters New
| Vehicle |
|---|
| 2008 Jeep Wrangler |
| 2010 Jeep Wrangler |
| 2014 Jeep Wrangler |
| 2016 Jeep Wrangler |
| 2007 Jeep Wrangler |
| 2018 Jeep Wrangler JK |
| 2011 Jeep Wrangler |
| 2013 Jeep Wrangler |
| 2017 Jeep Wrangler |
| 2009 Jeep Wrangler |
| 2012 Jeep Wrangler |
- WARNING CA Proposition 65: Yes
-
Features:
- 3/16 in. Thick Steel For Strength And Rigidity
- Maximum Corrosion Protection
- Counter Sunk Compressor
- Factory Attachment Points
- Engine Bay Compressor Mount
- With 3.6L V6.
- Jeep JL/Gladiator Engine Bay Compressor Mount
P311-5D78894 CMJL-01 DV8 Offroad New
| Vehicle | Submodel | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2021 Jeep Gladiator | Rubicon | V | 6 Cyl 3.6L | 220 | 3604 |
| 2021 Jeep Gladiator | Sport | V | 6 Cyl 3.6L | 220 | 3604 |
| 2020 Jeep Gladiator | Sport | V | 6 Cyl 3.6L | 220 | 3604 |
| 2020 Jeep Gladiator | Sport S | V | 6 Cyl 3.6L | 220 | 3604 |
| 2021 Jeep Gladiator | Willys | V | 6 Cyl 3.6L | 220 | 3604 |
| 2021 Jeep Gladiator | Willys Sport | V | 6 Cyl 3.6L | 220 | 3604 |
| Vehicle | Submodel | Block | Engine | CID | CC |
|---|---|---|---|---|---|
| 2021 Jeep Wrangler | 80th Anniversary | ||||
| 2021 Jeep Wrangler | Freedom | ||||
| 2021 Jeep Wrangler | Islander | ||||
| 2020 Jeep Wrangler | Rubicon | ||||
| 2019 Jeep Wrangler | Rubicon |
- For Engine Compartment; Fits ARB PN[CKMTA12/171503/CKMA12]
- Air Compressor Mounting Bracket; For Engine Compartment; Fits ARB PN[CKMTA12/171503/CKMA12];
P311-46721C3 Z609201 ZROADZ New
| Vehicle |
|---|
| 2016 Toyota Tacoma |
| 2017 Toyota Tacoma |
| 2018 Toyota Tacoma |
| 2019 Toyota Tacoma |
| 2020 Toyota Tacoma |
| 2021 Toyota Tacoma |
| 2022 Toyota Tacoma |
| 2023 Toyota Tacoma |
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message
-
Features:
- ARB® Air Compressor Mounting Brackets
- Mounts an ARB® Twin or Single Compressor
- Compatible with ARB® Manifold Kit and Compressor On/Off Switch
- Mounts the compressor in the engine bay
- on the passenger side
- away from water and debris
- Triangulated bracket design mounts to the firewall
- top
- and side of the inner fender panels
- Includes [1] Mounting Bracket[s]
- 90-degree air fitting for the top of the compressor
- Includes All necessary hardware and Step by Steps Installation Instructions
- Easy
- bolt-on installation
- no drilling required.
- Made from heavy gauge Mild Steel
- Black - Low Gloss Textured Powder Coat finish