Automatic Transmission Shift Kit
- BD Allison Pressure Controller - Chevy 2011-2016 Duramax 6.6L LML
- Allison automatic transmission;
- BD Allison Electronic Pressure Controller - Chevy 2011-2016 Duramax 6.6L LML
P311-23103C4 1031315 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2015 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2016 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2015 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2016 GMC Sierra 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2015 GMC Sierra 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2016 GMC Sierra 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2011 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2012 GMC Sierra 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2012 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2013 GMC Sierra 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2014 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
- Category: Shift & Pressure Controls
- Engine: Duramax 6.6l 11-16 Lml-lgh
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1030711
-
Features:
- 25% to 115% more theoretical holding power
- Delivers up to 275psi line pressure at WOT
- Only active when boost over 15psi, unlike solenoid foolers or plugs which are active all the time
- Does not create parasitic load or extra heat when inactive
- Does not cause clunky or unusual shifts due to dynamic activation
- No transmission relearn required
- Installs in under an hour
- BD 68RFE ProTect68 Pressure Control Kit Cummins 6.7L Dodge 2007.5-2018
- Includes Valve Body Separator Plate, Gaskets and Pressure Control Module;
- BD 68RFE ProTect68 Pressure Control Kit Cummins 6.7L Dodge 2007.5-2018 c/w Separator and Accumulator Plate
P311-3674A2C 1030362 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2010 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2008 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2010 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2011 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2013 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2014 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2017 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2012 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2014 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2017 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2018 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1062022
-
Features:
- Upgraded 68RFE Accumulator Plate
- Dynamic control ramps up the much larger sweep
- Prevent clutch slippage
- Kit includes pan gasket, 3 doughnut seals and check ball
- Installation takes 2-to-3 hours
- 56% more theoretical holding power
- No full transmission relearn required - quick relearn suggested
- A "fresh" stock transmission will have the ability to handle up to 400hp-450hp
- No tuning required
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Heavy duty accumulator plate to prevent accumulator blowout
- Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
- Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
- Electronic 68RFE PressureLoc Dodge 2007.5-2018 6.7L
- Increases Main Line Clutch Apply Pressure When Lockup Clutch Engaged; 68RFE transmissions;
- Electronic 68RFE Inline Electronic PressureLoc Dodge 2007.5-2018 6.7L
P311-56AF216 1030368-V2 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2008 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2009 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2008 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2009 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2011 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2012 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2014 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2015 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2018 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2016 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2017 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 19-up
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1030373
-
Features:
- Progressive pressure increase gives smooth engagements with lower load on the pump at idle
- Achieve shorter shifts and increased torque capacity without creating low-speed harshness
- Improved clutch holding capacity for increased durability
- Delivers 10 psi increase at lower pressure range and 25 psi increase at higher pressure ranges
- Advance control integrated chip eliminates the occasional error code caused by resistor based devices
- Easy to install in-line plug module
- BD Protect68 Gasket Plate Kit Dodge 6.7L 2019-2024 68RFE Transmission
- BD Protect68 Gasket and Separator Plate Kit Dodge 6.7L 2019-2022 68RFE Transmission
P311-3B1029C 1030375 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2019 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2019 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2020 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2020 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2021 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2021 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2022 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2023 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2023 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2024 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2024 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 19-up
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1071220x
-
Features:
- Ideal for use with EFI Live, HP Tuners or other transmission pressure tuning
- Recommended full throttle max line pressure 225-250psi
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Exclusive BD separator plate gaskets eliminate cross leaks and eliminate P0871 codes
- Heavy duty accumulator plate to prevent accumulator blowout
- Kit includes pan gasket, 3 doughnut seals and check ball
- This kit requires custom transmission tuning or an additional module to command higher line pressure
- Shift Kit - Chev Allison 1000 2001-2005 5spd
- Allison 6sd;
- Shift Kit - Chevy Allison 1000 2001-2005 5spd
P311-0CD0D71 1604720 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2001 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2002 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2003 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2004 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2001 GMC Sierra 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2002 GMC Sierra 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2005 GMC Sierra 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2001 GMC Sierra 3500 | V | 8 Cyl 6.6L | 403 | 6599 |
2002 GMC Sierra 3500 | V | 8 Cyl 6.6L | 403 | 6599 |
2003 GMC Sierra 3500 | V | 8 Cyl 6.6L | 403 | 6599 |
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2007 GMC Sierra 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
- Category: Shift & Pressure Controls
- Engine: Duramax 6.6l 04.5-06 Lly
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1064041
-
Features:
- NOTICE: This kit requires removal of the transmission for installation of the internal parts
- Installation recommendation: Experienced technician
- Includes our exclusive smart Trim/Clutch Control valve assemblies for increased durability
- Addresses Going to neutral under load
- 3-4 slip
- burned C2 or C3 clutches
- sticks in one gear
- won't move after extended parking
- loss of pump prime
- SHORT-CRISP-SMOOTH-upshifts and kickdowns
- Handles 500 Street Horsepower
- Tugger Shift Kit - 1999-2003 Ford 4R100
- 4R100 Transmission;
- Tugger Shift Kit - 1999-2003 Ford 7.3L PowerStroke 4R100
P311-2C5EC46 1600410 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
1999 Ford F-250 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2000 Ford F-250 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2001 Ford F-250 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2002 Ford F-250 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2003 Ford F-250 Super Duty | V | 8 Cyl 6.0L | 363 | - |
2003 Ford F-250 Super Duty | V | 8 Cyl 7.3L | 445 | - |
1999 Ford F-350 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2000 Ford F-350 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2001 Ford F-350 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2003 Ford F-350 Super Duty | V | 8 Cyl 7.3L | 445 | - |
2003 Ford F-350 Super Duty | V | 8 Cyl 6.0L | 363 | - |
- Category: Shift & Pressure Controls
- Engine: 7.3l Powerstroke 99-03
- Make: Ford
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1062124-4
-
Features:
- For Working Trucks - Doubles low clutch holding pressure in "1" for downhill use, high speed pull-into "1
- Handles exhaust brake
- Adjusts shift firmness, more cooling/lubrication, better converter feed & capacity
- NOTICE: This kit requires removal of the transmission for installation of the internal parts
- Installation recommendation: Experienced technician
- Shift Kit - Chevy Allison 1000 2006-2008 6spd
- Allison 6sd;
- Shift Kit - Chevy/GMC 6.6L Duramax Allison 1000 2006-2008 6spd
P311-4BDA4BD 1604721 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2006 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2007 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2008 Chevrolet Silverado 2500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2006 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2007 Chevrolet Silverado 3500 Classic | V | 8 Cyl 6.6L | 403 | 6599 |
2007 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
2008 Chevrolet Silverado 3500 HD | V | 8 Cyl 6.6L | 403 | 6599 |
- Category: Shift & Pressure Controls
- Engine: Duramax 6.6l 07.5-10 Lmm
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1064041
-
Features:
- Installation recommendation: Experienced technician
- Includes our exclusive Smart Trim/Clutch Control valve assemblies and items to modify the C2 clutch piston for increased capacity and more durability. The C2 clutch is the weakest part of the early 5 Speed Allison
- Addresses goes to neutral under load
- 3-4 slip
- burned C2/C3 clutches
- sticks in one gear
- won't move after extended parking
- loss of pump prime
- smart clutch control valves for increased durability
- SHORT-CRISP-SMOOTH-upshifts & kickdowns
- Handles 500 Street Horsepower
- BD 6R140 Transmission Pressure Controller - Ford 11-19 6.7L Powerstroke
- BD 6R140 Transmission Pressure Controller - Ford 2011-2019 6.7L Powerstroke
P311-3504C7B 1031320 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2011 Ford F-250 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2012 Ford F-350 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2013 Ford F-350 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2014 Ford F-250 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2015 Ford F-350 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2016 Ford F-250 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2017 Ford F-250 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2017 Ford F-350 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2018 Ford F-350 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2019 Ford F-250 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
2019 Ford F-350 Super Duty | V | 8 Cyl 6.7L | 406 | 6651 |
- Category: Shift & Pressure Controls
- Engine: 6.7l Powerstroke 17-up
- Make: Ford
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1030385
-
Features:
- 76% more theoretical holding power
- Delivers up to 300psi line pressure at WOT
- Only active when boost over 15psi, unlike solenoid foolers or plugs which are active all the time
- Does not create parasitic load or extra heat when inactive
- No transmission relearn required
- Installs in under an hour
- BD 48RE TapShifter comes with Valve Body Dodge 2003-2007
- 48RE transmission; Comes with exchange valve body;
- BD 48RE TapShifter comes with Valve Body Dodge 2003-2007 - Button Gear Selection
P311-4824E8B 1031382 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2003 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
2004 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
2005 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
2006 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
2007 Dodge Ram 2500 | L | 6 Cyl 5.9L | 359 | - |
2003 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
2004 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
2005 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
2006 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
2007 Dodge Ram 3500 | L | 6 Cyl 5.9L | 359 | - |
- Category: Shift Controls
- Engine: 5.9l Cummins 04.5-07
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1071217x
-
Features:
- Tap Shifter for your 03-07 48RE gives gear selection and converter lock-up control
- Automatic or manual shifting of the transmission
- Great for Street, Towing and Race applications
- Provides manual torque converter lock-up clutch control
- Works with stock shifting and has gear limiting function
- Sealed plug-in wiring, no cutting or tapping of wires required
- Kit includes exchange BD valve body, new model shift lever, BD control module, BD gear selection display and wiring harness
- Optional software download enables customizable shift points with new modes
- BD Protect68 Gasket Plate Kit Dodge 6.7L 2007.5-2018 68RFE Transmission
- Includes Valve Body Separator Plate And Gaskets;
- BD Protect68 Gasket and Separator Plate Kit Dodge 6.7L 2007.5-2018 68RFE Transmission
P311-3EDA20C 1030373 BD Diesel New
Vehicle | Block | Engine | CID | CC |
---|---|---|---|---|
2008 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2010 Dodge Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2008 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2009 Dodge Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2014 Ram 2500 | L | 6 Cyl 6.7L | 408 | - |
2011 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2012 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2013 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2014 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2015 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
2018 Ram 3500 | L | 6 Cyl 6.7L | 408 | - |
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 13-18
- Make: Dodge
- Prop 65 (C, R or CR): Cr
- Suggested Product: 1071220x
-
Features:
- Ideal for use with EFI Live, HP Tuners or other transmission pressure tuning
- Recommended full throttle max line pressure 225-250psi
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Exclusive BD separator plate gaskets eliminate cross leaks and eliminate P0871 codes
- Heavy duty accumulator plate to prevent accumulator blowout
- Kit includes pan gasket, 3 doughnut seals and check ball
- This kit requires custom transmission tuning or an additional module to command higher line pressure